Studios & mediaLogo boardAcrylic lettersGradient printCourieredIndoor

A gradient acrylic logo board for Trendani Recording Studio, made in Pune and couriered to Tamil Nadu

A white acrylic board with the Trendani logo and name raised in a blue-to-purple gradient, and RECORDING STUDIO in black. The client’s logo file was blurry, so we cleaned it up before cutting, made two boards and couriered them from Pune to Karaikudi in Tamil Nadu.

17 photos · tap any photo to see it full size · real job photos, only light and colour corrected; the diagram is an illustration, not to scale

The brief

Trendani Productions, a record label in Karaikudi, Tamil Nadu, found us online and wanted its logo on a board for its recording room. The only logo file they had was low-resolution: fine on a screen, but too blurry to laser-cut with clean edges.

What we made

We traced the logo again in CorelDRAW and put the gradient back on it, so the laser had sharp lines to follow. We don’t offer design as a service, and this clean-up was a one-off: we did it free, because the board would not have looked right without it. For the sharpest result, send us a clear vector file (.AI, .CDR or .PDF).

The base is a 5 mm gloss white acrylic sheet, 30 in wide and 24 in high, with a stud hole 1.75 in in from each edge at the corners.

For the logo and the name TRENDANI, we printed the blue-to-purple gradient on vinyl in-house and pasted it over a whole sheet of 3 mm white acrylic. Then we laid the letters out on that sheet and laser-cut vinyl and acrylic together, so the colour runs seamlessly right to the cut edge, with crisp white sides.

RECORDING STUDIO is cut from black acrylic. Every piece is bonded onto the base plate.

Four chrome stud caps hold the board about an inch off the wall. We sent the studs with the board, and the client drilled and fixed it himself.

He liked the first one enough to order two. Both boards were made in about a week and couriered to Tamil Nadu: we deliver even large acrylic boards anywhere in India.

Watch the job

The video loads only when you tap play, so the page stays fast.

Job facts

Client
Trendani Productions (Trendani Recording Studio)
Where
Karaikudi, Tamil Nadu (made in Pune, couriered)
When
April-May 2026
Size
30 in wide x 24 in high; 5 mm base, 3 mm raised letters; a stud hole 1.75 in from each edge at the corners; two identical boards
Rates
Non-lit acrylic logo boards: ₹800 per sq ft + GST; minimum order ₹3,000 + GST; shipping outside Pune extra
Job price
₹4,800 + GST per board (6 sq ft at ₹800), two boards, courier to Tamil Nadu extra (2026)

The price this client paid, at the time of the job. Every job is different: sizes, materials, site work and today’s rates change the price. See today’s rates or ask us for a quote.

Used for

  • Logo board inside a recording room
  • Studio and production-house branding
  • Fixed by the client with the studs we supplied
  • Couriered from Pune to Tamil Nadu
Our Location
Email Us
Call Now
WhatsApp