Your name, logo and tagline are cut right through the face of a lit board (an ACP cutting board, as most sign shops call it), so they glow out of it at night and read clean and flat by day. Choose flat letters (stencil-cut), which sit just behind the face, or in-cut letters (also called push-through), thick acrylic letters that stand 5 mm out of the board and glow on their edges too. Because the whole board is lit, even very fine fonts, long names and Marathi script glow evenly, and our own team installs it anywhere in Pune.
Smallest board 3 square feet · Indoor and outdoor · Installed across India
Jump to:PriceACP cutting or in-cutHow it is builtFine fontsInstallationFAQsOrdering
What it is
An ACP cutting board (also called a stencil-cut board) is a slim lit box whose face is a sheet of ACP (aluminium composite panel) or acrylic. We cut your name, logo and details right through that face, like a stencil, and bond a sheet of acrylic behind the cut-outs. LED modules inside the box light the acrylic, so the letters glow out of the solid board.
Stencil-cut boards have no raised letters, yet they look superb: smooth and flat by day, crisp and bright at night. Push the letters forward a little, as in-cut letters, and they catch the light on their edges as well.
bloc., a rooftop bar: the logo and the line under it cut into the board and lit, in our workshop
Brahmandnayak: the Marathi name and logo cut into a dark ACP board, glowing white at night
A raised 3D letter needs room for LED modules inside every stroke, so its strokes must be at least 1 inch wide. A cut-into-the-board letter does not: the whole box behind it is lit, so strokes of a few millimetres glow just as evenly. That makes these boards our answer for thin fonts, small text, long names and Marathi or Devanagari script, like the gold lettering on the ISKCON Pune BCEC board.
Nothing sticks out of a stencil-cut board, so it suits corridors, receptions, railings, pillars and projecting signs that people walk past. The small double-sided arrow sign at ISKCON Gifts is a stencil-cut ACP box that reads from both directions.
The first picture in this section is an illustration; the others show real boards we made.
Two ways to build the letters
Both boards are built the same way, with a face cut right through and an acrylic backing plate behind it. What changes is what sits in the cut-outs.
Look: the letters glow from just behind the face; from the road the board reads flat and smooth
Depth: the letters sit 3 mm behind the face, the thickness of the face itself
Best for: fine fonts, small text, logos with thin lines, long names
Budget figure: about ₹2,000 per square foot of the whole board
Look: 8 mm thick acrylic letters raised 5 mm above the board; they glow on the face and on the edges
Thicker: 10 mm or 15 mm letters, raised 7 or 12 mm, on request
Best for: names that need a little depth and a crisp glowing rim
Budget figure: about ₹2,000 per square foot of the whole board
On a stencil-cut board you can see the 3 mm step only when you stand close. If you want the face perfectly smooth, we slot a 3 mm acrylic letter into every cut-out so it sits level with the board. We call it an in-line board. It is extra work, and we price it on request.
In-cut letters stand up to about 12 mm out of the board. Cutting solid acrylic any thicker gets expensive very quickly, so for letters that stand 2.5 inches out we build hollow 3D LED acrylic letters or channel letters instead.
Not sure which one suits your logo? Send it to us on WhatsApp, and we will suggest the right build in your free proposal.
How a flat ACP cutting board is built
Every stencil-cut board is a slim box with a cut face. Here is every part, from the front to the back.
The face is a 3 mm sheet. ACP faces are cut on our CNC router; acrylic faces are cut on our laser, which gives even finer detail. The router's 3 mm bit leaves inside corners very slightly rounded, which nobody notices from a few feet away.
From inside, we bond a sheet of white or clear acrylic behind the cut-outs. That sheet is what you see through each letter, 3 mm behind the face. It also keeps rain and dust out at the front.
The LED modules sit on the back panel of the box, about 2 inches behind the backing plate, so the light spreads evenly before it reaches the letters and no bright spots show. We use UNI™, Rishang™ or Ares™ modules as standard and Osram™, Philips™ or Samsung™ on request, solder every joint and load our power supplies to only about 300 watts of their 400.
The box is ACP wrapped round an aluminium frame, about 3 inches deep, like our base boards on every lit sign. We fix it to the wall with L-angles; small indoor boards can simply hang on screws through the back panel, like a calendar.
The pictures marked as illustrations in this section were made to show each step; the other photographs show real boards we made.
How an in-cut board is built
An in-cut board starts exactly like a stencil-cut board. Then we push thick acrylic letters into the cut-outs, so each one stands out of the face.
ISKCON Pune BCEC by day: mirror-gold in-cut letters set into a black acrylic plate
The same board at night: the light glows round every letter and line
We cut every letter on our laser from 8 mm thick acrylic, so the edges come out glossy and polished and glow brightly. Our laser cuts acrylic up to 25 mm thick, so thicker letters are no problem.
Each letter goes into its cut-out and rests on the clear or white acrylic backing plate, where we bond it in place. 3 mm of the letter sits inside the 3 mm face and 5 mm stands out of the board. Letters cut from 10 mm or 15 mm acrylic stand 7 or 12 mm out and look even richer; they cost a little more, and we price them on request.
The LED modules about 2 inches behind shine through the backing plate and up through each letter, so it glows on its face and on its raised edges. On the ISKCON Pune BCEC board, the mirror-gold letters let the light out round their edges, so every letter gets a bright golden rim at night.
The pictures marked as illustrations in this section were made to show each step; the other photographs show real boards we made.
The middle of an O
When we cut an O, A, B, D, P, R or 8 out of the face, the piece in its middle (the island) comes loose. A paint stencil keeps it with thin bridges; our boards do not need them.
On a stencil-cut board, we bond the island onto the backing plate, exactly where it was, so the letter reads normally. On an in-cut board, the acrylic letter is a ring, and we push the island into the gap in its middle, level with the face, while the acrylic round it stands 5 mm out.
Fine fonts and lots of text
On a small board, a 3 or 4 foot office board with a name, a tagline and a list of services, the letters get too thin to raise as 3D letters. Cut into the board instead, every line stays sharp and glows evenly.
Stencil-cut strokes can be as fine as about 5 millimetres; in-cut strokes, about 8 to 10 millimetres. We set up your file so the finest lines still cut cleanly, and point out anything that needs thickening in your proposal.
Devanagari has thin strokes, curls and small matras that are hard to raise as 3D letters. Cut into the board, they keep every detail, as on the Brahmandnayak hotel board.
Inside offices, these boards look neat and nothing sticks out. For a ready-to-hang logo on an acrylic plate, see our backlit acrylic logo boards, built the same in-cut way, as for SAEE Build Perfection and Kay Bee Bio-organics.
The office picture at the top of this section is an illustration; the others show real boards we made.
A play of heights
Our most eye-catching boards mix all three builds: the main name in raised 3D letters about 2.5 to 3 inches deep, the tagline in in-cut letters, and the address and phone numbers in smaller stencil-cut letters. The name pulls the eye from far away, and the details stay crisp up close.
There is no separate product for mixed boards: they are priced on the same budget figure, and your proposal shows which part is built which way.
This hospital board, lit in our workshop, has raised ACCIDENT & EMERGENCY letters and the list of services below in smaller lit letters cut into the board.
The Swojas Advait pylon is cut to the outline of the building and carries lit logos and details, and the Panacea dental clinic board has five arch-shaped windows cut into its ACP and lit from behind, beside its raised name. See more in our guide to pylon and totem signs.
Not sure how it will look? Your free proposal shows your board on a photo of your site, by day and by night, before anything is cut.
The last picture in this section is an illustration; the others show real boards we made.
What we build with
Every lit board we make is built from the same handful of quality materials, fabricated in our own workshop in Pune.
Our CNC router, with ACP and acrylic sheets ready to cut
Cast acrylic sheets in a whole album of colours
Mirror-gold acrylic, for gold letters
ACP (aluminium composite panel): faces and boxes
Aluminium sections, joined into the frame inside a board
LED modules in white, warm white and RGB colours
Rows of LED modules fixed across the back of a board
An outdoor LED power supply (driver)
The aluminium frame behind an ACP board
Photographs of the materials and machines in our workshop.
Colours and light
You choose the colour of the board, the colour of the letters and the colour of the light.
A dark board with white letters, like Brahmandnayak; a white board with coloured letters, like Unnati World here; or a board in your brand colour with white letters. ACP comes in solid colours, metallic and brushed finishes, marble and wood; acrylic faces come glossy black, white or coloured.
For most colours, white LEDs behind coloured acrylic give the truest colour, by day and by night. When letters must look white by day and coloured at night, we use blue, red or green LEDs behind white acrylic, at no extra cost; they are not always in stock, so they may add a day or two. Colour-changing RGB lighting is extra.
For a full-colour picture or an exact brand shade, we print backlit vinyl and paste it on white acrylic behind the cut-out, as on this restaurant board with a lit food picture. Printed colours look slightly different at night, when the light shines through them.
Mirror-gold letters set into a black plate glow with a golden rim at night, as on the ISKCON Pune BCEC board. Brushed and metallic ACP faces work as well.
We light our boards in white (about 6,500 K), natural white (about 4,000 K) or warm white (about 3,000 K). Under warm white, white acrylic looks slightly yellowish.
The picture at the top of this section is an illustration; the others show real boards we made.
Price
For planning, budget about ₹2,000 per square foot + 18% GST of the whole board, the same as our other lit signs. This is a budget figure, not a final price: the size, the amount of cutting, in-cut or in-line letters, colours, the height of the site and the city all change the cost.
A board with only a name and little cutting usually comes in below this figure in your proposal; thicker in-cut letters, in-line letters and mixed boards push it up.
Office board
A 4 x 2 foot reception board: 8 square feet, about ₹16,000 + GST
Shop board
A 10 x 3 foot shop board: 30 square feet, about ₹60,000 + GST
Smallest
The smallest board we make is 3 square feet, for example 3 x 1 foot: about ₹6,000 + GST
Real price
Your exact price comes in the free proposal
The cut face (ACP or acrylic), the acrylic backing plate and the box on its aluminium frame
Stencil-cut letters, or in-cut letters from 8 mm acrylic
Industrial-grade LED modules, the power supply and all the soldered wiring
Your free proposal with layout, sizes, materials and day and night views
Installation, from ₹10,000 + GST in Pune, and transport
In-line letters, 10 or 15 mm in-cut letters, double-sided boards and RGB lighting
Projecting brackets, scaffolding and frames
The licence from the municipal corporation and a power point near the board (yours to arrange), and 18% GST
Enter the width and height of your board in the calculator at the top of the page for an instant budget figure.
Calculate your price →
Other shapes and sides
A stencil-cut box can also be lit on both faces or cut to a shape.
Both faces cut and lit from one box, for projecting signs that read from both directions; priced as two faces.
Free-standing lit signs at gates and sites; see our pylon guide.
Installation and delivery
Our own team installs every board in Pune. Installation starts from ₹10,000 + GST; we also install smaller boards, at a slightly higher price, once we have studied the job. Transport, the height of the board, scaffolding and brackets all go into the installation price in your proposal.
Outside Pune, we ship your board ready to fit, with the power supply and instructions for your electrician, or send our own team for larger jobs.
1
A photo of the site, the rough size you have in mind and your logo or the words you want.
2
Layout, sizes, materials, colours, and your board drawn on a photo of your site by day and by night.
3
Once you are happy with the proposal and the price, you approve it and pay in advance.
4
We cut, build and switch on every board in our workshop before it leaves.
5
On site, we fix the board on L-angles, or on screws for small indoor boards, and run the cable.
6
We switch on, check every letter and clean up.
Please arrange the licence from the municipal corporation, if your board needs one, and a power point near the board.
Most boards are ready to install 5 to 10 working days after you approve the proposal and pay. This is a typical time, not a promised date; coloured LEDs we need to buy in and large boards take longer, and we tell you in the proposal.
Free proposal
A site visit is a paid service (the fee is adjusted in your bill if you order). But you can save it altogether: send us three things, and we build your proposal free of charge.
1.A photo of the place where the board will go.
2.A rough size, for example 8 or 10 feet wide and 3 feet high. It does not need to be exact at this stage.
3.Your logo as a CDR or AI file, or simply the words you want.
The proposal is free, with no strings attached, and we refine it with you until it is perfect. See how we plan your sign board.
Power, warranty and care
LED modules use very little power. As an illustration, a 6 by 3 foot board draws about 100 to 150 watts, about 1 to 1.5 units of electricity for a 10-hour night. Ask for a timer that switches it off at midnight (at extra cost).
All the materials in our boards are outdoor grade, waterproof and weatherproof, so ACP cutting and in-cut boards work outdoors as well as indoors. Like anything outdoors, they collect dust in the cut-outs and behind the face over time, so clean them now and then.
In writing, from installation, on the LEDs, the power supply and the wiring.
Wipe the face with a soft damp cloth and mild soap; never thinner or acetone.
Applications
These boards go wherever a name with fine detail must be read clearly, by day and by night.
Marathi and Devanagari names, like Brahmandnayak; see all our restaurant signage.
Boards with a name, a tagline and services; see offices.
Names, taglines and phone numbers on one board; see shops and showrooms.
Brahmandnayak: the Marathi name cut into a dark ACP board and lit white
ISKCON Pune BCEC: mirror-gold in-cut letters glowing at night
The same ISKCON board by day
bloc.: a stencil-cut logo board lit in our workshop
Pushkraj: white and green stencil-cut letters, by day and at night
A beauty salon board: the outline of a woman lit in red, with stencil-cut letters
A sushi restaurant board on black printed ACP, with a lit food picture
Jhas Educational Services: in-cut letters on a yellow ACP board
A stereo company board: large in-cut letters, brightly lit
Unnati World: in-cut letters on white ACP
ISKCON Gifts: the double-sided stencil-cut arrow sign beside the shop
A hospital board with raised letters and lit details below
A restaurant board being made in our workshop
SAEE Build Perfection: 8 mm blue in-cut letters in a white plate, from the side
Swojas Advait: a pylon cut to the outline of the building
Every photograph in this gallery shows a board we made.
Watch
Prices mentioned in our older videos may be out of date; the budget figure on this page is current.
Part 5 of our series on lit signs: letters cut out of an ACP face and backed with acrylic, for fonts too thin to raise.
Part 6 of the series: acrylic letters set into the cut-outs so they stand out of the board and glow on their edges.
From your site photo and logo to a layout, a materials page and a clear price.
Not sure which sign?
ACP cutting and in-cut boards are two of the lit signs we make. Here is when each type is the better choice. Until each one has its own page, the cards open the matching section of our 3D LED sign boards page.
Glow: letters cut into a lit board
Best for: fine fonts, small text, a slim board
Budget figure: about ₹2,000 per square foot
Glow: front and sides, raised 2.5 to 3 inches
Best for: a bright, colourful name
Budget figure: about ₹2,000 per square foot
Glow: face only; metal sides
Best for: crisp letters read from far away
Budget figure: about ₹2,000 per square foot
Glow: none, or a halo on the wall behind
Best for: a premium metal finish
Budget figure: from ₹800 per square foot (non-lit)
Acrylic faces and acrylic sides, so every letter glows from the front and all round.
See the product →
Aluminium sides and a glowing acrylic face, crisp from far away.
See the product →
Polished steel letters with a PVD finish, plain or with a halo glow on the wall behind.
See metal letters →
Letters taller than 4 feet, high on a building.
See sky signs →
Flexible neon tubes shaped into words and logos, indoors or outdoors.
See neon signs →
Letters faced with sparkling crystal, lit from inside.
See crystal letters →
Thousands of bare LEDs on top of the letters, for the brightest sign on the street.
See open-dot boards →
A printed, evenly lit board for a lower budget.
See the product →
Still choosing? Read our guide to choosing a shop sign board, compare a 2D light box with 3D letters, or browse all our sign boards. For a ready-to-hang logo on an acrylic plate, see our backlit acrylic logo boards.
Design files
Send your logo as a vector file, ideally CDR or AI. If you have no logo and just want simple words, tell us the words and we lay them out on the board for you.
Stencil-cut strokes can be as fine as about 5 millimetres and in-cut strokes about 8 to 10 millimetres. In your proposal, we point out any part of your logo that needs thickening.
CDR
AI
EPS
SVG
We set up your file for production, but we don't design logos from scratch. If you need a logo, we can recommend good designers in Pune.
FAQs
Also called a stencil-cut sign board, it is a slim lit board whose face (ACP or acrylic) has your letters cut right through it, like a stencil. An acrylic sheet bonded behind the cut-outs glows when the LED modules inside the box are on, so the letters shine out of the solid board while the rest stays dark.
Also called a push-through board, it is built like a flat ACP cutting board, but thick acrylic letters (8 mm as standard) are pushed into the cut-outs and bonded to the backing plate. 3 mm of each letter sits inside the face and 5 mm stands out, so the letters glow on their face and on their edges.
Budget about ₹2,000 per square foot + 18% GST of the whole board. Boards with only a name and little cutting usually come in lower; in-line letters, thicker in-cut letters and mixed boards cost more. Your exact price comes in a free proposal; installation is quoted separately.
Stencil-cut strokes can be about 5 millimetres wide and in-cut strokes about 8 to 10 millimetres, far finer than raised 3D letters, which need at least 1 inch. That is why these boards suit small boards, taglines, phone numbers and Marathi names.
They sit 3 mm behind the face, the thickness of the face itself. From the road the board reads flat and smooth; only up close do you see the step. For a perfectly level face, we slot 3 mm letters into the cut-outs (an in-line board), priced on request.
Yes. Letters cut from 10 mm or 15 mm acrylic stand 7 or 12 mm out, at extra cost. For letters that stand 2.5 inches or more out of the board, hollow 3D acrylic letters or channel letters are more economical.
There are no bridges like on a paint stencil. On a stencil-cut board, the middle piece is bonded onto the backing plate where it was; on an in-cut board, it sits in the middle of the acrylic letter, level with the face.
Yes. All the materials are outdoor grade, waterproof and weatherproof. Dust collects in the cut-outs over time, so clean the board now and then.
Yes: coloured acrylic letters with white LEDs, or white letters with blue, red or green LEDs at no extra cost. Printed backlit vinyl gives full-colour pictures and exact brand shades. RGB lighting is extra.
Yes. A raised 3D name, an in-cut tagline and stencil-cut details on one board is one of our favourite combinations. Your proposal shows which part is built which way.
Yes. Our own team installs every board in Pune, from ₹10,000 + GST; smaller jobs are also installed, at a slightly higher price. Outside Pune, we ship the board ready to fit with the power supply and instructions, or send our team for larger jobs.
Usually 5 to 10 working days after you approve the proposal and pay. This is a typical time, not a promised date.
Yes: six months in writing from installation, on the LEDs, the power supply and the wiring. After that, we repair the boards we made and charge only for the parts.
At a glance
Product
ACP cutting and in-cut LED sign board (also called stencil-cut and push-through): letters cut into the face of a lit box
Face
3 mm ACP cut on a CNC router, or 3 mm acrylic cut on a laser; letters cut right through
Letters
Stencil-cut: acrylic backing plate seen 3 mm behind the face. In-cut: 8 mm laser-cut acrylic, raised 5 mm (10 or 15 mm on request). In-line: 3 mm letters level with the face, on request
Backing plate
White or clear acrylic bonded behind the cut-outs
Light
Industrial-grade LED modules (UNI™, Rishang™ or Ares™; Osram™, Philips™ or Samsung™ on request) about 2 inches behind the backing plate; white, natural white or warm white; blue, red or green at no extra cost; RGB extra
Wiring
Every joint soldered and heat-sleeved; power supply loaded to about 300 watts of 400
Box
ACP wrapped round an aluminium frame, about 3 inches deep; fixed with L-angles, or on screws for small indoor boards
Finest stroke
About 5 mm stencil-cut; about 8 to 10 mm in-cut
Size
From 3 square feet; double-sided and shaped boxes on request
Price
About ₹2,000 per square foot + 18% GST as a budget figure; exact price in the free proposal
Installation
Our own team in Pune, from ₹10,000 + GST; outside Pune, shipped ready to fit or installed by our team
Warranty
6 months in writing from installation; repairs at parts cost afterwards
Lead time
Usually 5 to 10 working days after proposal approval and payment; not a promised date
Ordering
1. Send us a photo of your site, a rough size and your logo or words on WhatsApp or through the form below.
2. We send you a free proposal with the layout, sizes, materials and day and night views.
3. We refine it with you and confirm the price, including installation.
4. Approve and pay. We build, test and install your board.
Our own team installs your board in Pune. Outside Pune, we ship it ready to fit or send our team for larger jobs.
You can see acrylic, ACP and LED samples at our studio in Shaniwar Peth.
We take 100% payment in advance; production starts once payment is received. All prices exclude 18% GST.
Pay by UPI or bank transfer (NEFT or RTGS) through our pay link, and share your GSTIN so you can claim input credit.
Send us a photo of your site, a rough size and your logo on WhatsApp, and we will send you a free proposal, with no site visit needed.
| Letters | ACP cutting, flat (stencil-cut), In-cut, raised 5 mm |