Products › Sign Boards › ACP Cutting and In-Cut LED Sign Boards

ACP Cutting and In-Cut LED Sign Boards

☆☆☆☆☆ 0.0 / 5.0  ·  0 reviews
Variant — Price per Sq Ft
ACP cutting, flat (stencil-cut) ₹2,000.00 /sq ft
In-cut, raised 5 mm ₹2,000.00 /sq ft

Your name, logo and tagline are cut right through the face of a lit board (an ACP cutting board, as most sign shops call it), so they glow out of it at night and read clean and flat by day. Choose flat letters (stencil-cut), which sit just behind the face, or in-cut letters (also called push-through), thick acrylic letters that stand 5 mm out of the board and glow on their edges too. Because the whole board is lit, even very fine fonts, long names and Marathi script glow evenly, and our own team installs it anywhere in Pune.

  • About ₹2,000 per square foot + GST as a budget figure (indicative); your exact price comes with a free proposal
  • Flat ACP cutting (stencil-cut) or in-cut letters raised 5 mm; thicker in-cut letters and level "in-line" letters on request
  • Fine fonts, small text, taglines, phone numbers and Marathi names that are too thin for raised 3D letters
  • ACP or acrylic face cut on our CNC router or laser, acrylic backing plate, industrial-grade LED modules about 2 inches behind
  • Fabricated in our workshop in Pune; installation in Pune from ₹10,000 + GST; 6-month written warranty

Smallest board 3 square feet · Indoor and outdoor · Installed across India

Get a Quote / Send Enquiry
Calculate your cost and send an enquiry — all in one place.
Step 1 — Select Material / Variant

Letters

Step 2 — Calculate Your Cost
Input unit:
in
in
pcs
Step 3 — Your Contact Details
WhatsApp This Estimate
🖨️
High Quality Print
⚡
Quick Turnaround
📞
Expert Support
Chat on WhatsApp
HSN Code:9989
Category:
Product image
Brahmandnayak hotel sign at night: the Marathi name and logo cut into a dark ACP board and glowing white

ACP cutting LED boards · In-cut letters · Also called stencil-cut and push-through · Made in Pune

Letters cut into the board, glowing from inside

Instead of fixing raised letters on top, we cut your name right through the face of a lit board and back it with acrylic. The result is a slim, clean board whose letters glow evenly at night, however fine the font, and look crisp and smooth by day.

An ACP cutting LED sign board above a Pune restaurant at dusk: the name SAI SNACKS and a tagline cut into a dark grey board and glowing white (illustration)

What it is

Your name, cut into a lit board

An ACP cutting board (also called a stencil-cut board) is a slim lit box whose face is a sheet of ACP (aluminium composite panel) or acrylic. We cut your name, logo and details right through that face, like a stencil, and bond a sheet of acrylic behind the cut-outs. LED modules inside the box light the acrylic, so the letters glow out of the solid board.

Stencil-cut boards have no raised letters, yet they look superb: smooth and flat by day, crisp and bright at night. Push the letters forward a little, as in-cut letters, and they catch the light on their edges as well.

bloc. rooftop bar logo sign glowing white

bloc., a rooftop bar: the logo and the line under it cut into the board and lit, in our workshop

Brahmandnayak stencil-cut LED ACP sign board glowing white at night, Pune, by Orchid Digitals

Brahmandnayak: the Marathi name and logo cut into a dark ACP board, glowing white at night

Close-up of the small laser-cut gold acrylic letters ISKCON and PUNE, BCEC embedded in black acrylic

For names too fine to raise

A raised 3D letter needs room for LED modules inside every stroke, so its strokes must be at least 1 inch wide. A cut-into-the-board letter does not: the whole box behind it is lit, so strokes of a few millimetres glow just as evenly. That makes these boards our answer for thin fonts, small text, long names and Marathi or Devanagari script, like the gold lettering on the ISKCON Pune BCEC board.

ISKCON GIFTS white acrylic letters by day above the gift shop entrance, with the lit arrow sign pointing to the door

Slim, flat and safe to brush past

Nothing sticks out of a stencil-cut board, so it suits corridors, receptions, railings, pillars and projecting signs that people walk past. The small double-sided arrow sign at ISKCON Gifts is a stencil-cut ACP box that reads from both directions.

The first picture in this section is an illustration; the others show real boards we made.

Drawing: one letter cut through three ways: stencil-cut 3 mm below the face, in-line level with the face, in-cut raised 5 mm (illustration)

Two ways to build the letters

Flat ACP cutting, or in-cut letters?

Both boards are built the same way, with a face cut right through and an acrylic backing plate behind it. What changes is what sits in the cut-outs.

ACP cutting, flat (stencil-cut)

Look: the letters glow from just behind the face; from the road the board reads flat and smooth

Depth: the letters sit 3 mm behind the face, the thickness of the face itself

Best for: fine fonts, small text, logos with thin lines, long names

Budget figure: about ₹2,000 per square foot of the whole board

In-cut, also called push-through

Look: 8 mm thick acrylic letters raised 5 mm above the board; they glow on the face and on the edges

Thicker: 10 mm or 15 mm letters, raised 7 or 12 mm, on request

Best for: names that need a little depth and a crisp glowing rim

Budget figure: about ₹2,000 per square foot of the whole board

Drawing: one letter cut through three ways: stencil-cut 3 mm below the face, in-line level with the face, in-cut raised 5 mm (illustration)

Level letters, on request: an in-line board

On a stencil-cut board you can see the 3 mm step only when you stand close. If you want the face perfectly smooth, we slot a 3 mm acrylic letter into every cut-out so it sits level with the board. We call it an in-line board. It is extra work, and we price it on request.

Angled view of the gold logo board showing the depth

Taller than 15 mm? Choose raised letters

In-cut letters stand up to about 12 mm out of the board. Cutting solid acrylic any thicker gets expensive very quickly, so for letters that stand 2.5 inches out we build hollow 3D LED acrylic letters or channel letters instead.

Not sure which one suits your logo? Send it to us on WhatsApp, and we will suggest the right build in your free proposal.

Drawing: a stencil-cut LED sign board cut through: 3 mm ACP face cut right through, white acrylic backing plate bonded behind the cut-outs, LED modules about 2 inches behind on the back panel, ACP box on an aluminium frame (illustration)

How a flat ACP cutting board is built

Cut, backed and lit from behind

Every stencil-cut board is a slim box with a cut face. Here is every part, from the front to the back.

A CNC router in a Pune sign workshop cutting letter shapes right through a dark grey 3 mm ACP sheet for an ACP cutting LED sign board (illustration)

1. The face, cut right through

The face is a 3 mm sheet. ACP faces are cut on our CNC router; acrylic faces are cut on our laser, which gives even finer detail. The router's 3 mm bit leaves inside corners very slightly rounded, which nobody notices from a few feet away.

A technician pressing a white acrylic backing plate over the cut-out letters on the back of an ACP cutting sign face, with rows of LED modules in the box beside it (illustration)

2. An acrylic backing plate behind the cut-outs

From inside, we bond a sheet of white or clear acrylic behind the cut-outs. That sheet is what you see through each letter, 3 mm behind the face. It also keeps rain and dust out at the front.

Rows of 3-LED modules fixed across the tray for an even glow

3. LED modules about 2 inches behind

The LED modules sit on the back panel of the box, about 2 inches behind the backing plate, so the light spreads evenly before it reaches the letters and no bright spots show. We use UNI™, Rishang™ or Ares™ modules as standard and Osram™, Philips™ or Samsung™ on request, solder every joint and load our power supplies to only about 300 watts of their 400.

The back of an ACP sign board on a workshop stand, built on a rust-proof aluminium section frame with the LED wiring led out through grommets

4. A slim box that fixes to the wall

The box is ACP wrapped round an aluminium frame, about 3 inches deep, like our base boards on every lit sign. We fix it to the wall with L-angles; small indoor boards can simply hang on screws through the back panel, like a calendar.

The pictures marked as illustrations in this section were made to show each step; the other photographs show real boards we made.

Drawing: an in-cut LED sign board cut through: 8 mm acrylic letters pushed into the 3 mm face, 3 mm inside and 5 mm raised, bonded to a clear backing plate, LED modules about 2 inches behind (illustration)

How an in-cut board is built

Thick acrylic letters pushed into the cut-outs

An in-cut board starts exactly like a stencil-cut board. Then we push thick acrylic letters into the cut-outs, so each one stands out of the face.

Mirror-gold acrylic logo on black acrylic in daylight

ISKCON Pune BCEC by day: mirror-gold in-cut letters set into a black acrylic plate

ISKCON Pune BCEC gold acrylic logo board glowing at night

The same board at night: the light glows round every letter and line

Angled view of the gold logo board showing the depth

1. Letters laser-cut from 8 mm acrylic

We cut every letter on our laser from 8 mm thick acrylic, so the edges come out glossy and polished and glow brightly. Our laser cuts acrylic up to 25 mm thick, so thicker letters are no problem.

Thick white acrylic letters being pushed into the cut-outs of a black sign face so they stand out of the board, an in-cut (push-through) sign being made (illustration)

2. Pushed in and bonded to the backing plate

Each letter goes into its cut-out and rests on the clear or white acrylic backing plate, where we bond it in place. 3 mm of the letter sits inside the 3 mm face and 5 mm stands out of the board. Letters cut from 10 mm or 15 mm acrylic stand 7 or 12 mm out and look even richer; they cost a little more, and we price them on request.

An in-cut LED sign board at night: white acrylic letters spelling SHANTI set into a black ACP face, glowing on their face and raised edges (illustration)

3. Lit through the backing plate and the letter

The LED modules about 2 inches behind shine through the backing plate and up through each letter, so it glows on its face and on its raised edges. On the ISKCON Pune BCEC board, the mirror-gold letters let the light out round their edges, so every letter gets a bright golden rim at night.

The pictures marked as illustrations in this section were made to show each step; the other photographs show real boards we made.

Drawing: the island inside a letter O on a stencil-cut board and on an in-cut board, front and side views (illustration)

The middle of an O

No bridges, no missing pieces

When we cut an O, A, B, D, P, R or 8 out of the face, the piece in its middle (the island) comes loose. A paint stencil keeps it with thin bridges; our boards do not need them.

On a stencil-cut board, we bond the island onto the backing plate, exactly where it was, so the letter reads normally. On an in-cut board, the acrylic letter is a ring, and we push the island into the gap in its middle, level with the face, while the acrylic round it stands 5 mm out.

An office reception sign board with a company name, a tagline and three lines of services in fine letters cut into the board and lit from inside (illustration)

Fine fonts and lots of text

Small boards, long names and fine scripts

On a small board, a 3 or 4 foot office board with a name, a tagline and a list of services, the letters get too thin to raise as 3D letters. Cut into the board instead, every line stays sharp and glows evenly.

Stencil-cut strokes can be as fine as about 5 millimetres; in-cut strokes, about 8 to 10 millimetres. We set up your file so the finest lines still cut cleanly, and point out anything that needs thickening in your proposal.

Brahmandnayak stencil-cut LED ACP sign board glowing white at night, Pune, by Orchid Digitals

Marathi and Devanagari names

Devanagari has thin strokes, curls and small matras that are hard to raise as 3D letters. Cut into the board, they keep every detail, as on the Brahmandnayak hotel board.

Side view of the SAEE board in our workshop: 8 mm blue acrylic letters set into the white base plate, standing about 5 mm proud

Indoor office and reception boards

Inside offices, these boards look neat and nothing sticks out. For a ready-to-hang logo on an acrylic plate, see our backlit acrylic logo boards, built the same in-cut way, as for SAEE Build Perfection and Kay Bee Bio-organics.

The office picture at the top of this section is an illustration; the others show real boards we made.

Drawing: one sign board with a raised 3D name, an in-cut tagline raised 5 mm and stencil-cut address and phone details, front and side views (illustration)

A play of heights

Three heights on one board

Our most eye-catching boards mix all three builds: the main name in raised 3D letters about 2.5 to 3 inches deep, the tagline in in-cut letters, and the address and phone numbers in smaller stencil-cut letters. The name pulls the eye from far away, and the details stay crisp up close.

There is no separate product for mixed boards: they are priced on the same budget figure, and your proposal shows which part is built which way.

Accident and Emergency 3D LED acrylic board for a hospital, lit on the workshop floor

Raised name, lit details

This hospital board, lit in our workshop, has raised ACCIDENT & EMERGENCY letters and the list of services below in smaller lit letters cut into the board.

Close-up of the Swojas Advait pylon: the lit building cut-out on top, the project name in white letters and the side panel of amenities

Cut-outs on pylons and clinic boards

The Swojas Advait pylon is cut to the outline of the building and carries lit logos and details, and the Panacea dental clinic board has five arch-shaped windows cut into its ACP and lit from behind, beside its raised name. See more in our guide to pylon and totem signs.

A shop sign at dusk with three heights on one board: raised 3D letters for OM MEDICALS, in-cut letters for the tagline and flat cut letters for the phone number (illustration)

Or three heights on a mock-up first

Not sure how it will look? Your free proposal shows your board on a photo of your site, by day and by night, before anything is cut.

The last picture in this section is an illustration; the others show real boards we made.

What we build with

The materials inside every board

Every lit board we make is built from the same handful of quality materials, fabricated in our own workshop in Pune.

CNC router with ACP and acrylic sheets at Orchid Digitals

Our CNC router, with ACP and acrylic sheets ready to cut

Various shades / colours of acrylic sheets that go into the making of acrylic signs and boards

Cast acrylic sheets in a whole album of colours

Mirror-finish gold acrylic sheet with its clear protective film peeling back from one corner

Mirror-gold acrylic, for gold letters

ACP or aluminium composite panels are sheets of plastic sandwiched with aluminum foil. they can be printed upon to create very strong and long lasting signs.

ACP (aluminium composite panel): faces and boxes

aluminium section for pinup board white green board

Aluminium sections, joined into the frame inside a board

LED modules for sign boards in three colours: white, warm white and RGB multicolour

LED modules in white, warm white and RGB colours

Rows of 3-LED modules fixed across the tray for an even glow

Rows of LED modules fixed across the back of a board

An LED driver, the power supply that feeds the LED modules inside a glow sign board

An outdoor LED power supply (driver)

The back of an ACP sign board on a workshop stand, built on a rust-proof aluminium section frame with the LED wiring led out through grommets

The aluminium frame behind an ACP board

Photographs of the materials and machines in our workshop.

A white ACP sign board on a compound wall by day with glossy blue in-cut acrylic letters reading BRIGHT FUTURE ACADEMY and a red line below (illustration)

Colours and light

Any board colour, any letter colour

You choose the colour of the board, the colour of the letters and the colour of the light.

White aluminium composite board with incut acrylic letters for the Unnati world shop sign board. The sign is lit up with blue and white colored LED modules

Three popular looks

A dark board with white letters, like Brahmandnayak; a white board with coloured letters, like Unnati World here; or a board in your brand colour with white letters. ACP comes in solid colours, metallic and brushed finishes, marble and wood; acrylic faces come glossy black, white or coloured.

Day and night view of a glow sign board. White and green acrylic letters stencil cut in an ACP base frame make for a great looking shop board of the Pushkraj store

White LEDs behind coloured acrylic

For most colours, white LEDs behind coloured acrylic give the truest colour, by day and by night. When letters must look white by day and coloured at night, we use blue, red or green LEDs behind white acrylic, at no extra cost; they are not always in stock, so they may add a day or two. Colour-changing RGB lighting is extra.

Stencil cut acrylic letters board for a restaurant named Sushi. Board made of black printed ACP with a brightly lit food image and letters glowing in red LEDs

Pictures and exact brand colours

For a full-colour picture or an exact brand shade, we print backlit vinyl and paste it on white acrylic behind the cut-out, as on this restaurant board with a lit food picture. Printed colours look slightly different at night, when the light shines through them.

ISKCON Pune BCEC gold acrylic logo board glowing at night

Mirror gold and brushed faces

Mirror-gold letters set into a black plate glow with a golden rim at night, as on the ISKCON Pune BCEC board. Brushed and metallic ACP faces work as well.

Drawing: the same white acrylic letters lit in white 6,500 K, natural white 4,000 K and warm white 3,000 K, with matching bulbs (illustration)

Three shades of white light

We light our boards in white (about 6,500 K), natural white (about 4,000 K) or warm white (about 3,000 K). Under warm white, white acrylic looks slightly yellowish.

The picture at the top of this section is an illustration; the others show real boards we made.

Drawing: one sign board with a raised 3D name, an in-cut tagline raised 5 mm and stencil-cut address and phone details, front and side views (illustration)

Price

What your board will cost

For planning, budget about ₹2,000 per square foot + 18% GST of the whole board, the same as our other lit signs. This is a budget figure, not a final price: the size, the amount of cutting, in-cut or in-line letters, colours, the height of the site and the city all change the cost.

A board with only a name and little cutting usually comes in below this figure in your proposal; thicker in-cut letters, in-line letters and mixed boards push it up.

Worked examples (budget figures)

Office board

A 4 x 2 foot reception board: 8 square feet, about ₹16,000 + GST

Shop board

A 10 x 3 foot shop board: 30 square feet, about ₹60,000 + GST

Smallest

The smallest board we make is 3 square feet, for example 3 x 1 foot: about ₹6,000 + GST

Real price

Your exact price comes in the free proposal

Included in the budget figure

The cut face (ACP or acrylic), the acrylic backing plate and the box on its aluminium frame

Stencil-cut letters, or in-cut letters from 8 mm acrylic

Industrial-grade LED modules, the power supply and all the soldered wiring

Your free proposal with layout, sizes, materials and day and night views

Quoted separately

Installation, from ₹10,000 + GST in Pune, and transport

In-line letters, 10 or 15 mm in-cut letters, double-sided boards and RGB lighting

Projecting brackets, scaffolding and frames

The licence from the municipal corporation and a power point near the board (yours to arrange), and 18% GST

Enter the width and height of your board in the calculator at the top of the page for an instant budget figure.

Calculate your price →
ISKCON GIFTS white acrylic letters by day above the gift shop entrance, with the lit arrow sign pointing to the door

Other shapes and sides

Double-sided, shaped and projecting boards

A stencil-cut box can also be lit on both faces or cut to a shape.

Double-sided

Both faces cut and lit from one box, for projecting signs that read from both directions; priced as two faces.

Shaped boxes

A round logo, an arrow or a building outline, cut to shape.

Pylons and totems

Free-standing lit signs at gates and sites; see our pylon guide.

Mixed builds

Raised letters, in-cut letters and stencil-cut details on one board.

Häagen-Dazs Café fascia letters being fitted, wiring still exposed

Installation and delivery

Installed by our own team in Pune, shipped across India

Our own team installs every board in Pune. Installation starts from ₹10,000 + GST; we also install smaller boards, at a slightly higher price, once we have studied the job. Transport, the height of the board, scaffolding and brackets all go into the installation price in your proposal.

Outside Pune, we ship your board ready to fit, with the power supply and instructions for your electrician, or send our own team for larger jobs.

1

Send us three things

A photo of the site, the rough size you have in mind and your logo or the words you want.

2

Your free proposal

Layout, sizes, materials, colours, and your board drawn on a photo of your site by day and by night.

3

Approve and pay

Once you are happy with the proposal and the price, you approve it and pay in advance.

4

Fabrication and a workshop test

We cut, build and switch on every board in our workshop before it leaves.

5

Fixing

On site, we fix the board on L-angles, or on screws for small indoor boards, and run the cable.

6

Switch-on

We switch on, check every letter and clean up.

All three lit parts in our workshop before fitting: the rose gold channel-letter R and the two contour boxes with rose gold steel letters

What you arrange

Please arrange the licence from the municipal corporation, if your board needs one, and a power point near the board.

Illuminated orange acrylic-faced aluminium channel letters spelling Yashogandharva, laid out and lit up in the Orchid Digitals workshop for testing before the ceiling-suspended installation

Usually 5 to 10 working days

Most boards are ready to install 5 to 10 working days after you approve the proposal and pay. This is a typical time, not a promised date; coloured LEDs we need to buy in and large boards take longer, and we tell you in the proposal.

From our proposal: the NOVA RESIDENCY sign drawn on a photo of the site’s 3.6 m wide steel gate arch

Free proposal

No site visit needed for your proposal

A site visit is a paid service (the fee is adjusted in your bill if you order). But you can save it altogether: send us three things, and we build your proposal free of charge.

1.A photo of the place where the board will go.

2.A rough size, for example 8 or 10 feet wide and 3 feet high. It does not need to be exact at this stage.

3.Your logo as a CDR or AI file, or simply the words you want.

The proposal is free, with no strings attached, and we refine it with you until it is perfect. See how we plan your sign board.

Brahmandnayak stencil-cut LED ACP sign board glowing white at night, Pune, by Orchid Digitals

Power, warranty and care

Low running costs and a long life

LED modules use very little power. As an illustration, a 6 by 3 foot board draws about 100 to 150 watts, about 1 to 1.5 units of electricity for a 10-hour night. Ask for a timer that switches it off at midnight (at extra cost).

All the materials in our boards are outdoor grade, waterproof and weatherproof, so ACP cutting and in-cut boards work outdoors as well as indoors. Like anything outdoors, they collect dust in the cut-outs and behind the face over time, so clean them now and then.

Six-month warranty

In writing, from installation, on the LEDs, the power supply and the wiring.

Repairs at parts cost

After the warranty, we repair our own boards and charge only for the parts.

Cleaning

Wipe the face with a soft damp cloth and mild soap; never thinner or acetone.

Nothing to knock off

With no raised letters, there is nothing for a ladder or a banner to break.

Applications

Where ACP cutting and in-cut boards work best

These boards go wherever a name with fine detail must be read clearly, by day and by night.

Restaurants and hotels

Marathi and Devanagari names, like Brahmandnayak; see all our restaurant signage.

Clinics and salons

Fine logos and lists of treatments, like Panacea dental clinic; see hospitals and clinics.

Offices and receptions

Boards with a name, a tagline and services; see offices.

Schools and institutes

Long names on compound walls and gates.

Shops with long names

Names, taglines and phone numbers on one board; see shops and showrooms.

Temples, pylons and direction signs

From the ISKCON Gifts arrow to the Swojas Advait pylon.

Brahmandnayak hotel sign at night: the Marathi name and logo cut into a dark ACP board and glowing white

Brahmandnayak: the Marathi name cut into a dark ACP board and lit white

ISKCON Pune BCEC gold acrylic logo board glowing at night

ISKCON Pune BCEC: mirror-gold in-cut letters glowing at night

Mirror-gold acrylic logo on black acrylic in daylight

The same ISKCON board by day

bloc. rooftop bar logo sign glowing white

bloc.: a stencil-cut logo board lit in our workshop

Day and night view of a glow sign board. White and green acrylic letters stencil cut in an ACP base frame make for a great looking shop board of the Pushkraj store

Pushkraj: white and green stencil-cut letters, by day and at night

Stencil cut acrylic letters glow sign board for beauty salon. Outline of a woman lit in red LEDs with the letters lit in white LEDs.

A beauty salon board: the outline of a woman lit in red, with stencil-cut letters

Stencil cut acrylic letters board for a restaurant named Sushi. Board made of black printed ACP with a brightly lit food image and letters glowing in red LEDs

A sushi restaurant board on black printed ACP, with a lit food picture

Glow sign board for Jhas Educational Services made of in-cut acrylic letters fixed on a yellow ACP baseboard being fitted on top of a compound wall

Jhas Educational Services: in-cut letters on a yellow ACP board

Large laser cut acrylic letters brightly lit with LEDs to create an attractive and attention-grabbing incut ACP glow sign board

A stereo company board: large in-cut letters, brightly lit

White aluminium composite board with incut acrylic letters for the Unnati world shop sign board. The sign is lit up with blue and white colored LED modules

Unnati World: in-cut letters on white ACP

ISKCON GIFTS white acrylic letters by day above the gift shop entrance, with the lit arrow sign pointing to the door

ISKCON Gifts: the double-sided stencil-cut arrow sign beside the shop

Accident and Emergency 3D LED acrylic board for a hospital, lit on the workshop floor

A hospital board with raised letters and lit details below

The Amritsar Junction family restaurant board under fabrication

A restaurant board being made in our workshop

Side view of the SAEE board in our workshop: 8 mm blue acrylic letters set into the white base plate, standing about 5 mm proud

SAEE Build Perfection: 8 mm blue in-cut letters in a white plate, from the side

Close-up of the Swojas Advait pylon: the lit building cut-out on top, the project name in white letters and the side panel of amenities

Swojas Advait: a pylon cut to the outline of the building

Every photograph in this gallery shows a board we made.

Watch

See ACP cutting and in-cut boards being explained

Prices mentioned in our older videos may be out of date; the budget figure on this page is current.

Stencil letter boards, explained

Part 5 of our series on lit signs: letters cut out of an ACP face and backed with acrylic, for fonts too thin to raise.

In-cut logo boards, explained

Part 6 of the series: acrylic letters set into the cut-outs so they stand out of the board and glow on their edges.

How we quote a lit sign

From your site photo and logo to a layout, a materials page and a clear price.

Not sure which sign?

Compare all eight of our lit sign types

ACP cutting and in-cut boards are two of the lit signs we make. Here is when each type is the better choice. Until each one has its own page, the cards open the matching section of our 3D LED sign boards page.

ACP cutting and in-cut (this page)

Glow: letters cut into a lit board

Best for: fine fonts, small text, a slim board

Budget figure: about ₹2,000 per square foot

Acrylic letters

Glow: front and sides, raised 2.5 to 3 inches

Best for: a bright, colourful name

Budget figure: about ₹2,000 per square foot

Channel letters

Glow: face only; metal sides

Best for: crisp letters read from far away

Budget figure: about ₹2,000 per square foot

Stainless steel letters

Glow: none, or a halo on the wall behind

Best for: a premium metal finish

Budget figure: from ₹800 per square foot (non-lit)

Still choosing? Read our guide to choosing a shop sign board, compare a 2D light box with 3D letters, or browse all our sign boards. For a ready-to-hang logo on an acrylic plate, see our backlit acrylic logo boards.

From our proposal: the NOVA RESIDENCY design the client sent, and our redraw with RESIDENCY in a box of its own

Design files

What to send us for your design

Send your logo as a vector file, ideally CDR or AI. If you have no logo and just want simple words, tell us the words and we lay them out on the board for you.

Stencil-cut strokes can be as fine as about 5 millimetres and in-cut strokes about 8 to 10 millimetres. In your proposal, we point out any part of your logo that needs thickening.

CDR

AI

PDF

EPS

SVG

We set up your file for production, but we don't design logos from scratch. If you need a logo, we can recommend good designers in Pune.

FAQs

Frequently asked questions

What is an ACP cutting board?

Also called a stencil-cut sign board, it is a slim lit board whose face (ACP or acrylic) has your letters cut right through it, like a stencil. An acrylic sheet bonded behind the cut-outs glows when the LED modules inside the box are on, so the letters shine out of the solid board while the rest stays dark.

What is an in-cut board?

Also called a push-through board, it is built like a flat ACP cutting board, but thick acrylic letters (8 mm as standard) are pushed into the cut-outs and bonded to the backing plate. 3 mm of each letter sits inside the face and 5 mm stands out, so the letters glow on their face and on their edges.

How much does it cost?

Budget about ₹2,000 per square foot + 18% GST of the whole board. Boards with only a name and little cutting usually come in lower; in-line letters, thicker in-cut letters and mixed boards cost more. Your exact price comes in a free proposal; installation is quoted separately.

How fine can the letters be?

Stencil-cut strokes can be about 5 millimetres wide and in-cut strokes about 8 to 10 millimetres, far finer than raised 3D letters, which need at least 1 inch. That is why these boards suit small boards, taglines, phone numbers and Marathi names.

Are the stencil-cut letters flat?

They sit 3 mm behind the face, the thickness of the face itself. From the road the board reads flat and smooth; only up close do you see the step. For a perfectly level face, we slot 3 mm letters into the cut-outs (an in-line board), priced on request.

Can the in-cut letters stand out more?

Yes. Letters cut from 10 mm or 15 mm acrylic stand 7 or 12 mm out, at extra cost. For letters that stand 2.5 inches or more out of the board, hollow 3D acrylic letters or channel letters are more economical.

What happens to the middle of letters like O and A?

There are no bridges like on a paint stencil. On a stencil-cut board, the middle piece is bonded onto the backing plate where it was; on an in-cut board, it sits in the middle of the acrylic letter, level with the face.

Can I use it outdoors?

Yes. All the materials are outdoor grade, waterproof and weatherproof. Dust collects in the cut-outs over time, so clean the board now and then.

Can the letters be in colour?

Yes: coloured acrylic letters with white LEDs, or white letters with blue, red or green LEDs at no extra cost. Printed backlit vinyl gives full-colour pictures and exact brand shades. RGB lighting is extra.

Can one board mix raised and cut letters?

Yes. A raised 3D name, an in-cut tagline and stencil-cut details on one board is one of our favourite combinations. Your proposal shows which part is built which way.

Do you install the board?

Yes. Our own team installs every board in Pune, from ₹10,000 + GST; smaller jobs are also installed, at a slightly higher price. Outside Pune, we ship the board ready to fit with the power supply and instructions, or send our team for larger jobs.

How long does it take?

Usually 5 to 10 working days after you approve the proposal and pay. This is a typical time, not a promised date.

Is there a warranty?

Yes: six months in writing from installation, on the LEDs, the power supply and the wiring. After that, we repair the boards we made and charge only for the parts.

At a glance

Product specifications

Product

ACP cutting and in-cut LED sign board (also called stencil-cut and push-through): letters cut into the face of a lit box

Face

3 mm ACP cut on a CNC router, or 3 mm acrylic cut on a laser; letters cut right through

Letters

Stencil-cut: acrylic backing plate seen 3 mm behind the face. In-cut: 8 mm laser-cut acrylic, raised 5 mm (10 or 15 mm on request). In-line: 3 mm letters level with the face, on request

Backing plate

White or clear acrylic bonded behind the cut-outs

Light

Industrial-grade LED modules (UNI™, Rishang™ or Ares™; Osram™, Philips™ or Samsung™ on request) about 2 inches behind the backing plate; white, natural white or warm white; blue, red or green at no extra cost; RGB extra

Wiring

Every joint soldered and heat-sleeved; power supply loaded to about 300 watts of 400

Box

ACP wrapped round an aluminium frame, about 3 inches deep; fixed with L-angles, or on screws for small indoor boards

Finest stroke

About 5 mm stencil-cut; about 8 to 10 mm in-cut

Size

From 3 square feet; double-sided and shaped boxes on request

Price

About ₹2,000 per square foot + 18% GST as a budget figure; exact price in the free proposal

Installation

Our own team in Pune, from ₹10,000 + GST; outside Pune, shipped ready to fit or installed by our team

Warranty

6 months in writing from installation; repairs at parts cost afterwards

Lead time

Usually 5 to 10 working days after proposal approval and payment; not a promised date

Ordering

Ordering and delivery

How to order

1. Send us a photo of your site, a rough size and your logo or words on WhatsApp or through the form below.

2. We send you a free proposal with the layout, sizes, materials and day and night views.

3. We refine it with you and confirm the price, including installation.

4. Approve and pay. We build, test and install your board.

Delivery and installation

Our own team installs your board in Pune. Outside Pune, we ship it ready to fit or send our team for larger jobs.

You can see acrylic, ACP and LED samples at our studio in Shaniwar Peth.

Payment and GST

We take 100% payment in advance; production starts once payment is received. All prices exclude 18% GST.

Pay by UPI or bank transfer (NEFT or RTGS) through our pay link, and share your GSTIN so you can claim input credit.

Ready to see your name glow?

Send us a photo of your site, a rough size and your logo on WhatsApp, and we will send you a free proposal, with no site visit needed.

Get a Free Proposal for Your 3D LED Acrylic Letter Sign

Please leave us your details and we will respond promptly

Letters ACP cutting, flat (stencil-cut), In-cut, raised 5 mm
Our Location
Email Us
Call Now
WhatsApp