Brand high-rise glass from inside the building: the adhesive is on the printed face, so your graphic is pasted from indoors and reads perfectly from the street. No cranes, no scaffolding.
Minimum order ₹3,000 + GST · Free delivery across India
Reverse-pasteable glass film · High-rise window branding · Pune · free delivery across India
Your graphic is printed with the adhesive over the image, so our fitters (or yours) paste it from inside the building on any floor, and it reads perfectly from the street.
The high-rise challenge
The glass facades of modern office buildings are prime real estate: the perfect place to advertise your products, show your brand colours or display your company logo to everyone on the street.
But standard glass film prints have their adhesive on the back, like a regular sticker, so they must be pasted from outside the building. On a fifth-floor window, that means hiring cranes or putting up bamboo scaffolding (pahad) so installers can reach the glass from outside. That logistical hurdle can make the whole project far more expensive, and working at height from outside carries real risk.
How reverse-pasteable film works
Our reverse-pasteable film solves this. We apply the adhesive layer directly over the printed image, on the front face of the film. Your graphic is then pasted from inside the building, with the image facing outwards, so it reads perfectly to the street and to passers-by below.
It works just like a parking permit stuck on the inside of a car windscreen and read from outside. For small stickers of this kind, see our reverse pastable stickers.
Fitters work safely from inside the building, whatever its height.
No external access equipment to hire, which cuts the installation cost of high-rise branding.
The printed face goes against the glass, so the graphic faces the street.
The print sits behind the glass, away from rain, dust and passing hands.
Also for indoor partitions
Reverse-pasteable film is not only for high-rise buildings. Many clients use it on indoor office partitions, where reaching the glass is no problem, simply for the look.
When a print is pasted on the front of a glass panel, the viewer sees the film's matte surface, which covers the glossy glass completely. When the same print is pasted on the back of the glass and viewed from the front, the viewer sees it through the glass: your design plus the shiny, glossy finish of the pane. The result looks like back-painted glass and gives your workspace a premium feel.
Three film variants
All three variants have the adhesive over the printed image and are pasted from inside the glass in the same way. They differ in how much you can see through the glass, and all three cost the same.
₹90 per sq ft + GST
Full visibility both ways: people outside can see into the room, and people inside can see out.
Showroom windows and mall frontages
Ads on the glass without hiding your interiors
₹90 per sq ft + GST
A milky, etched-glass look that blocks the view from both sides while still letting natural light through.
Privacy for offices and cabins
Rooms stay bright and airy
₹90 per sq ft + GST
Makes the glass completely opaque: nobody can see through from either side, and direct sunlight and glare are blocked.
Clinics, beauty parlours, confidential work areas
The most vivid colours of the three
Vivid colours on see-through film
On white opaque vinyl, prints look excellent because the white base reflects all the colours of the image back to you. Transparent and frosted films are different: light passes through them from behind, so a normal single-pass print can look dull or faded once it is on the glass, and fine details can become hard to see.
So we print transparent and frosted reverse-pasteable films in double strike (double pass), also called overprinting, as standard and at no extra cost. The print head passes twice over the same area, laying a second layer of ink exactly on top of the first. The extra ink slightly over-saturates the colours, which makes up for the light shining through the film, so your graphic stays vivid when viewed from the front.
How it's printed
Glass facades need big graphics: most office partitions are 8 to 10 feet high from floor to ceiling, and as wide as the room they close off. That is why we stock reverse-pasteable film in rolls 3, 4 and 5 feet wide. The rolls are hundreds of metres long, so your print can be any length you need.
Your artwork is printed on our industrial wide-format inkjet printers at very high resolution, with genuine, branded Mimaki eco-solvent or UV inks depending on the job (how the inks compare). See our printing infrastructure.
Any length, so one print can run the full height of a partition.
Prints wider than 5 ft are split into vertical tiles, which are pasted side by side on the glass to form one image.
Wyte™, Onyx™ and GCO™ film as standard; 3M™ or Avery™ on request, at a higher price.
Monomeric film as standard; polymeric or cast film on request.
Before you order
With reverse-pasteable film, the graphic is seen through the glass, so the glass sits between the viewer and your message. If the glass is tinted or dark, people outside will struggle to see your text and images through it.
Tinted exterior glass? Reverse-pasteable film is not the right choice there. Choose an opaque glass film print pasted on the outer surface of the glass instead, for maximum visibility, or ask us about white ink glass film.
Pricing
All three variants cost ₹90 per sq ft + 18% GST, double strike included. Choose your film and enter your size in the calculator at the top of the page for an estimate.
The smallest print we make is 3 x 4 ft; smaller designs are billed as 3 x 4 ft. Our minimum order is ₹3,000 + GST, so combine several prints, or print a larger graphic, to reach it.
Size
3 prints of 3 ft x 4 ft = 36 sq ft
Film
Transparent reverse-pasteable film
Rate
₹90 per sq ft
Cost
36 x ₹90 = ₹3,240 + 18% GST
₹3,000 + GST per order; each print at least 3 x 4 ft (smaller designs billed as 3 x 4 ft). Combine several prints to reach the minimum.
Usually 2-3 days after artwork approval and payment, plus delivery or installation time. Typical, not a promised date; rush jobs can be moved up when the schedule allows.
Free across India: hand delivery in Pune, courier elsewhere. Urgent? Collect from our shop in Shaniwar Peth.
Applications
The main use is branding the outer glass of tall buildings without outside access. The second is keeping the glossy look of glass partitions indoors. Our clients use it for:
Logos, brand colours and ads on upper-floor windows, pasted from inside.
Brand graphics on the glass, pasted from inside the showroom.
Offers and store branding on large glass frontages.
A glossy, back-painted look on cabins and meeting rooms.
Graphics on the partition behind a serving counter.
Opaque film for complete privacy, with your branding facing the street.
Installation
The video shows the wet method for glass films in general. Reverse-pasteable film goes on the same way, from the inside of the glass, with one difference: the adhesive is on the printed face, so the print is laid printed side up before you peel the liner. Follow these steps:
1
Spray soapy water on the inside of the glass, clean it thoroughly, and wipe off any remaining dust with a squeegee or a clean cloth.
2
Spray the clean glass with soapy water once more.
3
Place the print, printed side up, on the wet glass so it becomes slightly damp.
4
Holding the print in place, peel off the release liner to expose the adhesive on the printed face, and spray the adhesive generously with soapy water.
5
Turn the print over and start from one corner or edge, smoothing the film onto the glass with a squeegee or cloth; the soapy water lets you reposition it until it is perfectly aligned.
6
Press out any air bubbles and wrinkles, squeegee out all the water from under the film, and wipe the film dry.
7
Leave it for a few hours: as the water evaporates, the adhesive bonds firmly.
Installation service in Pune: on orders of ₹10,000 + GST and above, our fitters paste the film for you from inside the building, charged extra and quoted after reviewing the job; on jobs between ₹3,000 and ₹10,000 installation is possible on request at a slightly higher charge. Outside Pune, the film is easy to paste yourself with the steps above.
Design files
Send your artwork at the final size in high resolution, exactly as it should read from outside the glass. We accept all common formats; vector files give the cleanest edges for logos and lettering.
AI
CDR
EPS
SVG
TIFF
PNG
JPG
Set the artboard to the finished size on the glass, e.g. 3 x 4 ft, not 3 x 4 in, and send the measurements of each glass panel.
Email the original AI, CDR, EPS, SVG or PDF file. WhatsApp compresses images, so a forwarded picture won't print sharply.
A photo of the glass helps us plan the tiles and check whether the glass is tinted.
Before we print, we send you a proof on WhatsApp; production starts after your OK.
We prepare your file for printing and tiling, but we don't design artwork from scratch. If you need a design, we can recommend good designers in Pune.
Other glass films
Reverse-pasteable film is one of several films we print for glass. We never print directly on the glass itself: every job is a film that is pasted on it. See the full guide on our glass film prints page.
Colour prints on clear film, pasted on the outside of the glass.
Etched-glass look with privacy, printed or plain.
Full-colour graphics that block the view, best on tinted glass.
One-way vision film for a graphic outside with a view out, and white ink glass film for bright white graphics on clear film.
FAQs
It is a glass film print with the adhesive on the printed face, over the image, instead of on the back. It is pasted on the inside of the glass, with the image facing out, so it reads correctly from outside, just like a parking permit on a car windscreen.
Ordinary glass films are pasted from outside, which on upper floors needs cranes or bamboo scaffolding. Reverse-pasteable film is pasted from inside the building, on any floor, so there is no external access equipment to pay for and no risky work at height outside.
Yes. Pasted on the back of a partition, the print is seen through the glass, so the partition keeps its glossy finish and looks like back-painted glass.
Transparent if people should still see through the glass (showrooms, malls). Frosted for privacy with natural light (offices, cabins). Opaque for complete privacy and the most vivid colours (clinics, beauty parlours). All three cost ₹90 per sq ft + GST.
Light passes through these films, which can wash out a normal print. We print transparent and frosted films in double strike, a second layer of ink over the first, as standard and at no extra cost, so the colours stay vivid.
Not well. The graphic is seen through the glass, so dark or tinted glass hides it. For tinted glass, choose an opaque glass film print pasted on the outer surface, or ask us about white ink film.
Wyte™, Onyx™ and GCO™ film as standard. If you prefer 3M™ or Avery™ film, we can arrange it at a higher price.
Each print is at least 3 x 4 ft; smaller designs are billed as 3 x 4 ft. The minimum order is ₹3,000 + GST, so combine several prints or choose a larger size. For example, 3 prints of 3 x 4 ft are 36 sq ft x ₹90 = ₹3,240 + GST.
Our rolls are 3, 4 and 5 feet wide and any length. Prints wider than 5 feet are printed in vertical tiles that are pasted side by side to form one image.
No. Send your design exactly as it should read from outside the glass; we print it so that it faces the street once pasted.
In Pune, yes: our fitters paste it from inside the building on orders of ₹10,000 + GST and above, charged extra and quoted after reviewing the job; between ₹3,000 and ₹10,000 it is possible on request at a slightly higher charge. Outside Pune, the film is easy to paste yourself with our step-by-step guide.
Typically 2-3 days after artwork approval and payment; rush jobs can be moved up when the schedule allows, but we don't promise dates. Delivery is free across India: hand delivery in Pune, courier elsewhere. Urgent orders can be collected from our shop in Shaniwar Peth, Pune.
Yes. It is a film, not paint, so it can be peeled off, for example when you vacate a rented office. We don't print directly on glass; see all our glass film options.
At a glance
Product
Glass film print with the adhesive over the printed image, pasted from inside the glass
Variants
Transparent, frosted or opaque film, all ₹90 per sq ft + GST
Film brands
Wyte™, Onyx™, GCO™ as standard; 3M™ or Avery™ on request at a higher price
Film construction
About 100-micron film with strong adhesive on the printed face, under an about 100-micron release liner
Film grade
Monomeric as standard; polymeric or cast film on request
Printing
Industrial wide-format inkjet printers, high resolution
Inks
Genuine Mimaki eco-solvent or UV inks, depending on the job
Double strike
Transparent and frosted films printed in double pass as standard, at no extra cost
Roll widths
3, 4 and 5 ft; any length; wider prints tiled vertically
Price
₹90 per sq ft + 18% GST
Minimum
Print 3 x 4 ft (smaller billed as 3 x 4 ft); order ₹3,000 + GST
Not for
Tinted or dark glass (the graphic is seen through the glass)
Application
Wet method with soapy water and a squeegee, from inside the glass; removable later
Installation
Pune: ₹10,000 + GST and above, charged extra; ₹3,000-₹10,000 on request at a premium
Typical lead time
2-3 days after artwork approval and payment, plus delivery; no promised dates
Delivery
Free across India; Pune hand delivery 2-3 days, courier 3-7 working days elsewhere
Ordering
1. Choose your film in the calculator above and enter your size, or message us your glass sizes and a photo of the site.
2. Email us your artwork at final size. We send you a proof on WhatsApp.
3. Approve the proof and pay through the link we send; production starts once payment is received.
4. We print your film and deliver it, or install it for you in Pune.
Free across India. Pune: hand delivery in 2-3 days. Other cities: surface courier, 3-5 working days to metros, 5-7 elsewhere; tracking details are emailed at dispatch. Urgent? Collect from our shop in Shaniwar Peth, or send your own courier.
All prices exclude 18% GST, shown separately on the invoice. Pay by UPI or bank transfer (NEFT/RTGS) through the pay link. Share your GSTIN for input credit. The invoice states whether delivery and installation are included.
Choose your film and enter your size in the calculator for an instant estimate, or send us your glass sizes and artwork on WhatsApp.
Please leave us your details and we will respond promptly
| Types of Reverse Pastable Films | Transparent Reverse-pasteable Glass Film Prints, Frosted Reverse-pasteable Glass Film Prints, Opaque Reverse-pasteable Glass Film Prints |
