Your logo and name as individual 3D acrylic letters that glow from within, fixed straight onto the wall with every wire hidden behind it.
From ₹12,000 + GST (3 x 2 ft) · 6-month warranty from installation
3D LED letters · Backlit acrylic logo · Floating look · Hidden wiring · Pune · delivered across India
Individually laser-cut 3D acrylic letters, lit from within by LED modules and fixed directly on the wall. No board, no visible cables: just your brand, glowing.
The floating letters look
Most lit signs sit on a board or a box. These don't. Each letter of your name, and each part of your logo, is a separate 3D acrylic piece fixed directly on the wall, so the sign looks like part of the building rather than something hung on it.
Switch it on and the letters glow evenly from within. The effect is clean, modern and hard to miss: exactly what a reception, lobby or entrance wall needs.
Hollow letters about 2.5 to 3 inches deep stand proud of the wall.
LED modules inside every letter light it up evenly.
There is no base plate or backing sheet around the letters.
All the wiring runs behind the wall, out of sight.
How we make it
We laser-cut your logo and letters from imported cast acrylic (Lucite™, Astari™ or equivalent brands) and build each one as a hollow letter about 2.5 to 3 inches deep. The hollow space holds industrial-grade LED modules (Rishang or Uni), and an industrial-grade power supply runs the whole sign.
Every curve of your logo is cut precisely from the vector file.
Lucite™, Astari™ or equivalent brands, for clean edges and an even glow.
Rishang or Uni LED modules fitted inside each hollow letter.
An industrial-grade power supply for the whole sign comes with it.
Invisible installation
Because there is no board to hide the wires, the wiring goes through the wall. Each letter gets its own cable from behind, and the letters are linked to one another behind the wall too, so the front stays completely clean.
1
We fix a full-size stencil on the wall: a precise map for every letter, so the sign sits straight.
2
Each letter is drilled and fixed directly onto the wall at its marked spot.
3
Cables run from behind the wall into the back of each letter and from letter to letter.
4
The power supply is connected to a nearby power point and the whole sign lights up evenly.
This method needs access to the back of the wall and a wall that lets cables pass through, plus a power point nearby. If your site can't allow that, we recommend the same glowing letters on a slim base plate, which hides the wiring behind the plate.
Installation and delivery
In Pune, our team does the drilling and the concealed wiring. We check the site first and quote the installation separately, on top of the per-square-foot price.
Outside Pune, we ship the letters, the power supply and a marked stencil, and your own electrician fits them and runs the wiring. Shipping is charged extra and confirmed before dispatch, as the letters travel as a bulky, fragile parcel.
Our team fits the letters and runs the concealed wiring. Installation is quoted after a site check, on top of the sign price.
Supplied with the power supply and a marked stencil for your electrician. Shipping extra, confirmed before dispatch.
6 months from the date of installation. Built for years of trouble-free use; repairs after 6 months are chargeable.
Watch · Standalone letters
Part 3 of our glow sign series is about exactly this product: hollow, LED-lit acrylic letters and logos, each built as its own piece so it can be fixed straight onto a wall without a rectangular board behind it.
Watch it to see how the letters are built and why the finished sign looks so clean on the wall.
Watch · From proposal to glow
A 3D LED acrylic sign for Tea Post café: we start with a proposal, then laser-cut the letters and logo, pack the hollow 3-inch-deep letters with bright LED modules and install them on site.
Every one of our signs starts the same way: with a free proposal you approve before anything is made.
Before we make it
Send us your logo and the wall size or a photo of the wall. We prepare a proposal with the layout, the letter sizes, the specifications and a 3D render of the sign on your wall, so you can see it before we make it.
Once you approve the proposal and pay, fabrication usually takes 3-4 working days, plus courier time outside Pune or the installation visit in Pune. We confirm the timeline with your order; it is typical, not a promised date.
AI
CDR
EPS
SVG
Send your logo as a vector file (AI, CDR, EPS, SVG or PDF) so it can be laser-cut cleanly. We help prepare the layout, but we don't design logos from scratch; if you need one, we can recommend good designers in Pune.
Applications
Anywhere your brand should be the first thing people see. More ideas in our office decor tips and on our acrylic sign boards page. Not sure lit letters are right for you? Try the board finder in our sign board guide.
Your logo glowing on the wall behind the front desk.
Your name on the outside wall of the building where you work.
Beside or above the entrance door of your office.
A glowing brand wall that customers remember and photograph.
A premium brand accent in meeting rooms and leadership cabins.
Names of buildings, towers and campuses on entrance walls.
Sizes and pricing
The price is ₹2,000 per sq ft + 18% GST, worked out on the overall width x height of your logo and name layout. The smallest billed size is 3 x 2 ft (₹12,000 + GST); layouts larger than 8 x 4 ft are quoted on request. Enter your size in the calculator at the top of the page for an estimate.
Want the same look without lights? See non-lit standalone letters or non-lit letters on a base plate.
Layout
Logo and name, 4 x 2 ft = 8 sq ft
Rate
₹2,000 per sq ft
Sign
8 x ₹2,000 = ₹16,000 + 18% GST
Installation
Pune: quoted after a site check
FAQs
Individual 3D acrylic letters and logo pieces, lit from within by LED modules and fixed directly on the wall without a base plate, so the sign looks as if it floats on the wall.
We mark the wall with a stencil, drill and fix each letter in place, and run the cables from behind the wall into each letter and from letter to letter, so no wiring shows at the front.
Access to the back of the wall, a wall that lets cables pass through, and a power point nearby. If that isn't possible, we recommend the letters on a slim base plate instead.
₹2,000 per sq ft + 18% GST on the overall width x height of the layout. The smallest billed size is 3 x 2 ft (₹12,000 + GST); a 4 x 2 ft layout is ₹16,000 + GST.
No. In Pune our team does the drilling and concealed wiring, quoted separately after a site check.
Yes. We ship the letters, the power supply and a marked stencil, and your own electrician fits them. Shipping is charged extra and confirmed before dispatch.
Yes. They suit reception walls indoors and building fronts or entrance walls outdoors, as long as there is a power point nearby.
About 2.5 to 3 inches. The hollow letters hold the LED modules.
Imported cast acrylic (Lucite™, Astari™ or equivalent brands) and industrial-grade Rishang or Uni LED modules, with an industrial-grade power supply.
Yes. We prepare a free proposal with the layout, specifications and a 3D render of the sign on your wall; we make it only after you approve.
Usually 3-4 working days after you approve the proposal and pay, plus courier time or the installation visit. We confirm it with your order.
Yes, 6 months from the date of installation. After that, repairs are chargeable.
Your logo as a vector file (AI, CDR, EPS, SVG or PDF), plus the wall size or a photo of the wall.
At a glance
Product
Standalone 3D backlit acrylic letters and logo, fixed directly on the wall
Acrylic
Imported cast acrylic: Lucite™, Astari™ or equivalent brands, laser-cut
Letter depth
Hollow, about 2.5 to 3 inches
Lighting
Industrial-grade LED modules (Rishang or Uni)
Power
Industrial-grade power supply included; needs a nearby power point
Wiring
Concealed, run from behind the wall
Base plate
None: the letters are fixed individually for a floating look
Fixing
Drilled onto the wall using a full-size stencil
Use
Indoor and outdoor: receptions, lobbies, building fronts, entrances
Price
₹2,000 per sq ft + 18% GST on the overall layout
Size
Smallest billed 3 x 2 ft (₹12,000 + GST); over 8 x 4 ft on request
Installation
Pune: our team, quoted after a site check
Outside Pune
Supplied with a stencil for your electrician; shipping extra
Warranty
6 months from installation; repairs chargeable after that
Proposal
Free layout, specifications and 3D render before fabrication
Ordering
1. Send us your logo (vector file) and the wall size or a photo, or enter your size in the calculator above.
2. We send you a free proposal with the layout, specifications and a 3D render.
3. Approve the proposal and pay through the link we send; fabrication starts once payment is received.
4. We install in Pune, or ship the letters with a stencil for your electrician.
In Pune our team brings and fits the sign. Outside Pune, shipping is charged extra and confirmed before dispatch. You can also collect from our shop in Shaniwar Peth.
All prices exclude 18% GST, shown separately on the invoice. Pay by UPI or bank transfer (NEFT/RTGS) through the pay link. Share your GSTIN for input credit. The invoice states whether delivery and installation are included.
Enter your layout size in the calculator for an instant estimate, or send us your logo and a photo of the wall on WhatsApp for a free proposal.
